MeteoWind II
anemometer

Exceed MEASNET wind energy standards. Same robustness as the original, with highest levels of accuracy. Heating available.

1st Class anemometer performance. 1st Class robustness. It's the most accurate combined wind speed and wind direction sensor available on the market.

PRECISE MEASUREMENT

  • Exceeds MEASNET Linearity 4-16m/s and 4-20m/s
  • Accuracy 0.05m/s with a standard error of <0.05m/s
  • Triple level lightning protection, EMC & transient resistance for ultimate reliability.
  • Certified for use in aviation; airport & heliport weather stations.
  • Industrial RS-485 & MODBUS interface. (Analog output coming soon).

APPLICATIONS

  • Wind energy assessment 
  • Weather stations (AWOS)
  • Industrial & dispersion monitoring
  • Road weather stations
  • Airport and Heliport weather monitoring systems

SAFETY & RELIABILITY

  • Intrinsically safe operation with <4.5mA power consumption and in-rush protection
  • Triple level lightning protection & transient resistance for ultimate reliability.

 

    MeteoWind
    anemometer

    Robust & accurate. Metal construction with an anodized aluminum shell for long term corrosion resistance and survivability. 

    Proven toughness and dirt resistance in winter road maintenance applications. Tested in the Alps and Tatra mountains. 

    SUPERB ACCURACY & ROBUSTNESS

    • Robust dual support arm elliptical cup design.
    • All metal wind vane.
    • Oversize stainless steel bearings with Aeroshell fluid lubrication.
    • Waterproof bayonet connector shielded from the elements.
    • Triple level lightning protection, EMC & transient resistance for ultimate reliability.
    • Industrial RS-485 & MODBUS interface.

    APPLICATIONS

    • Weather stations (AWOS)
    • Meteorological stations
    • Industrial & dispersion monitoring
    • Road weather stations

    SAFETY & RELIABILITY

    • Intrinsically safe operation with <4.5mA power consumption and in-rush protection
    • Triple level lightning protection & transient resistance for ultimate reliability.

    EASY TO INSTALL & INTEGRATE

    Industry standard MODBUS ASCII & MODBUS RTU communication
    Industry standard RS-485 industrial interface for high reliability applications
     

    MEASNET CALIBRATION

    MeteoWind 2 anemometers are regularly calibrated at an independent laboratory: WindGuard in Germany. Calibration provides individual slope and offset values to configure the anemometer or your data logger.

    Calibrated anemometers feature either of the following certificates:

    ISO/IEC 17025:2005
    MEASENT/IEC 61400-12-1:2005

    All sensors come standard with 1pt factory calibration to verify assembly, aerodynamics and bearings.